Aerial Cable / Messenger

Features:

• May be used to support fiber optic cable
• Can be mounted on round or flat surfaces, on a pole or on a standoff bracket
• Vertical fingers support cable during stringing operation
• Clamping Range: .398" - .56"
• Mounting hole is 11/16"

Material: Body and Keeper: Aluminum Alloy Hardware: Steel, Hot Dip Galvanized  

View Table In Fullscreen

Features:

• • Curved groove for more cable support
  • Lip on bottom groove kicks upward to support cable during installation
  • Hook to support cable during stringing operation
  • Independent clamping - messenger remains clamped if pole shrinkage occurs

Material: Ductile Iron, Hot Dip Galvanized

View Table In Fullscreen

Features:

• Nut Retainer - cast in body of clamp permits independent mounting of body: also permits through bolt to act as an extra independent clamping bolt
• Belled Groove Ends - allow better angle, as well as tangent installations
• Spurs -provide better stability
• Independent Clamping - not affected by pole shrinkage

Material: Ductile Iron, Hot Dip Galvanized  

View Table In Fullscreen

Features:

• Curved messenger groove for better support
• Body tapped for 5/8" bolt
• Hook for supporting messenger during stringing operation
• Messenger groove lip kicks-up to support cable during installation
• Independent clamping-clamp remains tight on messenger if pole shrinkage occurs
• Teeth on legs to resist movement

Material: Aluminum Alloy

View Table In Fullscreen

Features:

• Curved messenger groove for better support
• Body tapped for 5/8" -11 UNC thru bolt
• Hook for supporting messenger during stringing operation
• Messenger groove lip kicks-up to support cable during installation
• Independent clamping - messenger remains tight if pole shrinkage occurs
• Nut and bolt assembly not included
• Cable range of ground wire is .16" to .25"

Material: Aluminum Aloy

View Table In Fullscreen

Features:

• 6-inch long curved clamping groove to conform to sag of span
• Generously belled groove ends for angles
• Teeth on feet resists down-slotting
• Smoothed area for stringing operation
• For attaching medium size cable and triplex
• Special nut retaining feature around body mounting bolt hole

Material: Hot Dip Galvanized, Ductile Iron

View Table In Fullscreen

Features:

• For attaching medium to heavy-duty cable on both angle and tangent construction
• Two separate clamping plate bolts allow clamping action to be independent of wood shrinkage

Material: Hot Dip Galvanized, Ductile Iron

View Table In Fullscreen

Features:

• Small economical clamp for light duty construction
• A stringing finger is included on the clamping plate
• The back of the clamp body is recessed to fit over nut
• A second nut secures the clamp plate and assures positive, independent clamping action regardless of wood shrinkage

Material: Hot Dip Galvanized, Ductile Iron

View Table In Fullscreen

Features:

• Designed to accommodate inside of outside angles from 10 degrees to 35 degrees
• Accommodates .25" - .50" bare messenger or .25: insulated messenger
• Clamp groove ends are generously rounded to prevent damage to bare or insulated messenger
• The inner, pole-side clamp section is tapped to accept a 5/8" diameter bolt an includes a curved surface with spurs to penetrate into the pole and provide a stable installation
• The design provides a 1-5/8" clearance from the surface of the pole to the cable and 3-3/4" clamping surface length.

Material: Hot Dipped Galvanized, Ductile Iron

View Table In Fullscreen

Features:

Clamp Body is threaded for 5/8" - 11 UNC bolt. Uses include the following:

• Suspension attachment for static cable to transmission structures
• Suspension attachment for neutral cable to distribution structure
• Eyes provided for deadending distribution neutral service drops
• Upper clamping groove provided for optional bonding of ground wire

Material: Ductile Iron, Hot Dip Galvanized

View Table In Fullscreen