Features:

• Power installed anchor rod and eyenut are assembled at the factory.
• Used with solid hub or socket drive power installed screw anchors.
• One catalog number for both the rod and eyenut simplifies material handling.

Application:

• Select the rod diameter based on the ultimate load requirement, length, and eyenut (number of guys to be attached).
• Typically the installation will be with one 7 foot length rod.
• The rod threads must match the hub tapped hole.
• A 5/8 diameter rod is used with any solid or socket drive power installed screw anchor designated for a 5/8 rod.
• The 3/4 and 1 inch diameter rods have the same threads and are used for any solid or socket drive power installed screw anchor designated for 3/4 or 1 inch rod

Material:

• Hot Dip Galvanized