|
|
|
|
Features:
- Power installed anchor rod used with solid hub or socket drive power installed screw anchors
Application:
- Select the rod diameter based on the ultimate load requirement and length.
- Typically the installation will be with one 7 foot length rod.
- The rod threads must match the hub tapped hole.
- A 5/8" diameter rod is used with any solid hub or socket drive power installed screw anchor designated for a 5/8" rod.
- The 3/4" and 1 inch diameter rods have the same threads and are used for any solid hub or socket drive power installed screw anchor designated for 3/4" or 1 inch rod.
Material:
|
| 5/8 Inch Diameter; 16,000 lb Ultimate Tensile Strength; Rod only |
| Catalog Number |
Length (ft.)* |
Weight Ea (lbs) |
|
D6231/2
|
3.5 |
3.6 |
|
D62
|
7 |
7.3 |
| 5/8 Inch Diameter; 16,000 lb Ultimate Tensile Strength; Rod only |
| 3/4 Inc Diameter; 23,000 Lb Ultimate Tensile Strength; Rod only |
| Catalog Number |
Length (ft.)* |
Weight Ea (lbs) |
|
D7531/2
|
3.5 |
5 |
|
D75
|
7 |
9.3 |
| 3/4 Inc Diameter; 23,000 Lb Ultimate Tensile Strength; Rod only |
| 1 Inch Diameter; 36,000 Lb Ultimate Tensile Strength; Rod only |
| Catalog Number |
Length (ft.)* |
Weight Ea (lbs) |
|
D10031/2
|
3.5 |
9.6 |
|
D100
|
7 |
15.5 |
| 1 Inch Diameter; 36,000 Lb Ultimate Tensile Strength; Rod only |
Notes:
1) Catalog Number (2) = Joslyn catalog number which is now obsolete and has been replaced by the Dixie catalog number shown in the first column.
|
|
