Lag
All MPS Lag Screws have rolled threads. Below the head is an upset shoulder with the same outside diameter as the threads to provide a snug fit in hardware mounting holes.
- Gimlet point Lag Screws are installed with a wrench.
- Fetter drive and twist drive lag screws can either be wrenched or driven like a nail for speedier installation without sacrificing any of the holding strength of regular gimlet point lag threads.
- Twist drive lags are furnished with a drive point for additional starting ease and accuracy. This feature is also available on most sizes of Fetter Drive lags.
Material: Hot Dip Galvanized Steel
Fetter Drive Regular Point
| Catalog Number | Size (Inches) | Thread Length 'T' (Inches) | Weight/100 (lbs) |
|---|---|---|---|
| J8743 | 3/8 x 3 | 2-1/4 | 9.6 |
| J8754 | 1/2 x 4 | 2-5/8 | 24 |
| J8765 | 5/8 x 5 | 3-1/2 | 44.2 |
| J8742-1/2 | 3/8 x 2-1/2 | 1-3/4 | 8.5 |
Fetter Drive Drive Point
| Catalog Number | Size (Inches) | Thread Length 'T' (Inches) | Weight Lbs (kg) |
|---|---|---|---|
| J8743P | 3/8x3 | 2 | 9.9 |
| J8744P | 3/8x4 | 2-1/2 | 12.8 |
| J8753P | 1/2x3 | 2-1/4 | 19.6 |
| J8754P | 1/2x4 | 2-5/8 | 24 |
| J8756P | 1/2 X 6 | 3 | 28 |
| J87541/2P | 1/2 x 4-1/2 | 2-5/8 | 26.2 |
Twist Drive - Drive Point
| Catalog Number | Size | Thread Length 'T' (Inches) | Weight/100 (lbs) |
|---|---|---|---|
| J8753TP | 1/2x3 | 2-1/4 | 19.6 |
| J8754TP | 1/2x4 | 2-5/8 | 24 |
Hex Head, Fetter Drive Regular Point
| Catalog Number | Size (Inches) | Thread Length 'T' (Inches) | Weight/100 (lbs) |
|---|---|---|---|
| J8652HH | 1/4x2 | 1-1/2 | 2.9 |
| J8652-1/2HH | 1/4 x 2-1/2 | 1-3/4 | 3.5 |
Hex Head, Gimlet Point
| Catalog Number | Size (Inches) | Thread Length 'T' (Inches) | Weight/100 (lbs) |
|---|---|---|---|
| J8732 | 5/16x2 | 1-1/2 | 4.7 |