Bayonets

Ground Wire Bayonets are used for supporting overhead ground wires. Top hole and slot are 9/16" diameter on 2" hole centers for mounting clamps with 1/2" diameter bolts. Clamps are not included and should be ordered separately (J5455). Bayonet pole mounting holes accommodate 5/8" diameter machine bolts.

Material: Hot Dip Galvanized Steel

Description

The straight type bayonet consists of one angle with clamp holes punched in both legs to permit mounting the bayonet to either the face or the side of the pole.  Straight bayonets also have a 7/16" diameter hole at the bottom for a ground lug if required. Corner bayonets consist of two angle sections and two 1/2" bolts for fastening them together.  One angle is offset to fit 8" diameter poles; however, the legs can either be spread apart or pushed together to fit other diameters.  The mounting bolt holes in the bent legs are slotted to allow for any pole boring inaccuracy.

Links & PDFs

Straight Bayonets Dim Drawing Image

Straight Bayonets

Catalog Number A E Angle Size Weight/100 (lbs)
J1132 48 12 2-1/2 x 2-1/2 x 1/4 1600
J1134 84 20 3 x 3 x 1/4 3400
J1130 36 10 2 x 2 x 1/4 960

Corner Bayonets Dim Drawing Image

Corner Bayonets

Catalog Number A E Angle Size Weight/100 (lbs)
J1135 36 10 2 x 2 x 3/16 1400
J1137 66 15 2 x 2 x 1/4 3440

Scroll to Top