Showing the single result

Extension Bracket

MacLean Power Rack Extension Brackets are used to provide additional clearance between a secondary rack and the pole surface when necessary to clear obstructions or maintain proper wire alignment.  Two brackets are required for installation. 

The 9 gauge steel bracket back, with a 4-inch wide bearing surface, is curved to fit the pole and has three staggered holes to permit mounting with either a 5/8-inch bolt or two 1/2-inch lag screws.  A 5/8" x 2" carriage bolt is furnished with each bracket for attaching the rack.

Material: Hot Dip Galvanized, Steel

Description

J2357 is RUS approved.

Links & PDFs

J2355 Dim Drawing Image

Catalog Number Extension From Center of Pole (Inches) Weight/100 (lbs)
J2357 9 325

Scroll to Top