MPS Steel Crossarms are produced from structural steel tubing or angle for high strength deadend and tangent applications. Multiple bolt holes are included for a variety of conductor attachment points and to permit assembly of jumper pins and arrester / equipment mounting brackets. The arms are provided with a center mounting plate for attachment to the pole.
Material: Steel, Hot Dip Galvanized
3 x 5 Angular Steel Dead End Crossarm
|Catalog Number||A (in)||B (in)||L (in.)||Ultimate Strength Rating per Phase (lbs)||Weight Lbs (kg)|
1) All holes are 11/16" dia. unless otherwise noted.
2) Strength ratings based on balanced load applications
5 x 5 Tubular Steel Dead End Crossarm
|Catalog Number||L (in.)||A (in)||B (in)||C (in)||Diameter (in)||E (in)||F (in)||G (in)||S (in)||Weight Lbs (kg)||Ultimate Strength Rating per Phase (lbs)|
1) Strength ratings based on balanced load applications
2) All holes are 13/16" dia. unless otherwise noted
SF-TA-102-FPL Ultimate Strength Rating per Phase (lbs)
|Hole Spacings||19||24||48||Load / Connection|
|6 wire (3/Phase)||x||x||x||2500 Lb.|
|4 wire (2/Phase)||x||x||3500 Lb.|
|4 wire (2/Phase)||x||x||3000 Lb.|
|2 wire (1/Phase)||x||5000 Lb.|