1 1/2" (3.8 cm) Square Hub

Power Hub Screw Anchors are helical distribution guy anchors used in normal soil conditions. The 1.5” square hub anchors are available in 2 torque ratings.

These anchors are installed using a Kelly Bar adapter and Torque Tube to apply torque directly to the anchor’s square hub. They are commonly used with a 7’ anchor rod and single, double, or triple eyenut. Extensions for the Torque Tube and anchor rod are available when deeper installation depths are required. Final installed height of the exposed anchor should be 8 to 12 inches above grade level.

The Power Hub anchors are coated in a rust inhibitor.

Description

A complete Power Hub Screw Anchor assembly consists of a helical hub, anchor rod and eyenut.  The helix size (diameter) and number of helices are selected for the required holding strength.  The hub, either socket drive or solid hub, is selected for installation torque requirement.  The rod diameter is determined by the guy load and installed depth, and eyenut for the number of guys.

1-1/2” SQUARE HUB ANCHORS – 7,000 ft-lb. INSTALLATION TORQUE

Catalog Number Helix Size Inches (cm) Tapped for Rod Size Inches (cm) Weight Lbs (kg)
D244-7 (2) 4 (10.2) 3/4 or 1 (1.9 or 2.5) 20 (9.1)
D284-7 (2) 8 (20.3) 3/4 or 1 (1.9 or 2.5) 27 (12.2)
D184-7 8 (20.3) 3/4 or 1 (1.9 or 2.5) 11 (5)
D2104-7 (2) 10 (25.4) 3/4 or 1 (1.9 or 2.5) 32 (14.5)
D1104-7 10 (25.4) 3/4 or 1 (1.9 or 2.5) 15 (6.8)
D1114-7 12 (30.5) 3/4 or 1 (1.9 or 2.5) 18 (8.2)

1-1/2” SQUARE HUB ANCHORS – 6,000 ft-lb. INSTALLATION TORQUE

Catalog Number Helix Size Inches (cm) Tapped for Rod Size Inches (cm) Weight Lbs (kg)
D2104 (2) 10 (25.4) 3/4 or 1 (1.9 or 2.5) 38 (17.2)
D284 (2) 8 (20.3) 3/4 or 1 (1.9 or 2.5) 32 (14.5)
D182 8 (20.3) 5/8 (1.6) 11 (5)
D184 8 (20.3) 3/4 or 1 (1.9 or 2.5) 11 (5)
D1104 10 (25.4) 3/4 or 1 (1.9 or 2.5) 14 (6.4)
D1114 12 (30.5) 3/4 or 1 (1.9 or 2.5) 17 (7.7)
D1134 14 (35.6) 3/4 or 1 (1.9 or 2.5) 22 (10)

Scroll to Top