ACSR CRS Splice (Corrosion Resistant Splice)

MPS CRS - Corrosion Resistant Splice automatic splices are used on ACSR, AAC, AAAC conductor.

Features:

  • Pop up tab to verify proper insertion, vent holes for moisture removal and air cooling
  • Stainless steel spring and pilot cup to improve corrosion performance
  • Advanced synthetic inhibitor for superior corrosion protection.

Rated to hold a minimum of 95% of RBS of the strand used.

ANSI C119.4 Full Tension Class A connector with color coded strand guide for easy identification.

Description

The 765xx series of automatic connectors are RUS approved.

7651-CRS Dim Drawing Image

Catalog Number ACSR ASTM-B232 AAAC ASTM-B399 AAC ASTM-B231 A (in) B (in) Strand Color Guide Conductor Diameter Range Standard Pack
7660-CRS 556.5-18/1 to 795.0-36/1 556.5 - 636.0 600-795.0 (37STR) 795.0 (61STR) 23.50 2.34 NATURAL 0.879 - 1.040 8
7658AP-CRS 266.8-18/1, 336.4-18/1 266.8 & 336.4 266.8, 336.4, & 397.5 21.50 1.85 GREEN/BROWN 0.580-0.724 10
7659-CRS 397.5-18/1, 477-18/1 397.5 & 477 477, 556.5, & 397.5 23.50 2.06 AQUA 0.740-0.856 10
7656AP-CRS 3/0 & 4/0 3/0 & 4/0 4/0 & 266.8 17.25 1.56 PINK/BLACK 0.502-0.592 25
7653-CRS 1/0 1/0 1/0 & 2/0 15.30 1.20 YELLOW 0.365-0.425 50
7654AP-CRS 1/0 & 2/0 1/0 & 2/0 1/0, 2/0 & 3/0 16.00 1.27 GRAY/YELLOW 0.365-0.475 25
7652AP-CRS #2 & #4 #2 & #4 #2 & #4 12.50 1.01 RED/ORANGE 0.229-0.340 100
7651-CRS #4 #4 #4 10.00 0.92 ORANGE 0.229-0.265 100

Tension representing a minimum of 15% of the rating breaking strength of the conductor is recommended to assure a permanent low resistance electrical connection.

Scroll to Top