Lift, For Thimble eye Bolts

Features: Lift Plates are recommended for use behind the eyes of angle thimble eye bolts with lag screws to increase load capacity either where loads are excessive or guys are steep. The plate distributes the load over a greater surface area, protecting the wood pole against shear damage.

All plates measure 2-1/2-inch x 7-inch, curved on a 3-inch radius. Plates  for 3/4-inch eyebolts have 7/8 x 1-inch oval holes.  Screw holes are 9/16-inch diameter for 1/2-inch lags.

Material: Hot Dip Galvanized