Showing 1–12 of 60 results

Double Arming

Double Arming Bolts are fully threaded and assembled with four square nuts. They are used in double crossarm construction to secure and lock in the spacing between the crossarms. The ends of the bolts can accept eyenuts for deadend applications. Length dimensions do not include the points.

Improved corrosion resistant options are available!

Better: TDG coated items
Best: TransArmour coated items

Description

RUS Listed

Links & PDFs

7/8

7/8 Inch Diameter - Minimum Tensile Strength 27,700 lbs.

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J9120 20 391
J9122 22 421
J9124 24 451
J9126 26 480
J9128 28 510
J9130 30 540
J9132 32 569
J9134 34 599
J9136 36 629

5/8 Inch Diameter - Minimum Tensile Strength 13,550 Lbs.

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J8860 10 118
J8862 12 136
J8864 14 142
J8866 16 158
J8868 18 187
J8870 20 192
J8872 22 208
J8874 24 224
J8876 26 240
J8877 28 256
J8878 30 264
J8879 32 284
J8880 34 295
J8881 36 332

3/4 Inch Diameter - Minimum Tensile Strength 20,050 Lbs.

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J8882 12 196
J8883 10 167
J8884 14 220
J8886 16 240
J8888 18 260
J8890 20 284
J8892 22 304
J8894 24 336
J8896 26 345
J8897 28 365
J8898 30 386
J8899 32 400
J9003 34 420
J9004 36 460

Table below are items protected with zinc applied by the Thermal Diffusion Galvanizing (TDG) process (reference ASTM A 1059). Corrosion protection and service life for TDG items is greater than that provided by standard hot dip galvanizing.

Click here for more information

TDG 5/8 Inch Diameter

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J8868T 18 187
J8870T 20 192
J8872T 22 208
J8874T 24 224
J8876T 26 240
J8877T 28 256
J8878T 30 264

Table below are items protected using TransArmour polymer coating over the standard hot dip galvanized zinc. Corrosion protection and service life for TA items exceeds both TDG and standard hot dip galvanizing.

Click here for more information

TA 5/8 Inch Diameter

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J8866TA 16 158
J8868TA 18 187
J8870TA 20 192
J8872TA 22 208
J8874TA 24 224
J8876TA 26 240
J8877TA 28 256
J8878TA 30 264

Table below are items protected using TransArmour polymer coating over the standard hot dip galvanized zinc. Corrosion protection and service life for TA items exceeds both TDG and standard hot dip galvanizing.

TA 3/4 Inch Diameter

Catalog Number Bolt Length 'L' (Inches) Weight/100 (lbs)
J8886TA 16 240
J8888TA 18 260
J8890TA 20 284
J8892TA 22 304
J8894TA 24 336
J8896TA 26 345
J8897TA 28 365
J8898TA 30 386

Scroll to Top