Showing all 2 results

1-1/2" (3.8 cm) Guy Terminations

Guy Adapters for 1-1/2” RCS shaft screw anchors are one-piece double or triple eye guy adapter for 1-1/2” RCS shafts and 1-1/4” round power shaft screw anchors. It is not used to help install the anchor and torque should not be applied to it.

The cast guy adapters incorporate an integral lifting eye. The guy tensioning devise (come-a-long) is attached directly to the lifting eye, eliminating the need for an extra adapter. The lifting eye is rated at 12,000 lbs ultimate tension strength. 

Hot Dip Galvanized per ASTM A123.


A complete Power Shaft assembly consists of a lead helix section, extension(s) and guy termination other attachment.  The helix size (diameter) and number of helices are selected for the required holding strength.  The shaft size and rating is selected based on the necessary holding strength and installation torque requirement.  The guy attachment is chosen based on the number of guys.


Catalog Number Eyenut Type Seat Diameter Inches (cm) Groove Diameter Inches (cm)
D6604US Double Eye 1-5/8 (4.1) 3/4 & 3/4 (1.9 & 1.9)
D6606US Triple Eye 1-5/8 (4.1) 7/16 , 9/16 , 7/16 (1.1, 1.4, 1.1)

D6604US and D6606US are not Buy America certified.

Scroll to Top