Showing all 12 results

Insulated Secondary & Deadend

Clevis mounting holes are for 5/8" bolts

Mounting holes are slotted to permit installation without removing insulators . Insulators are shown for illustration only and must be ordered separately.

Material: Hot Dip Galvanized

Description

J0313, J1300 are RUS approved.

Links & PDFs

CCA-5-3.12 Dim Drawing Image

Corrosion resistant aluminum alloy Clevis for use with 3 inch spool insulators
Material:
Clevis - Aluminum Alloy
Cotter Key - Stainless Steel

Catalog Number A B Weight/100 (lbs)
CCA-5-3.12 3 1/8 3 5/8 85

1)  Insulator shown for illustration only and must be ordered separately

J1300 Dim Drawing Image

Clevis mounting holes are for 5/8 inch bolts. Mounting holes are slotted to permit installation without removing insulators. Insulators are shown for illustration only and must be ordered separately. The J1300 is designed to develop high strength on deadends or line pulls. It has a mounting slot for one 5/8 inch machine bolt and two staggered side holes for 1/2 inch lag screws.

Catalog Number For Use w/ Insulator Catalog No. Weight/100 (lbs)
J1300 J151 or J0101 210

1)  Insulators are shown for illustration only and must be ordered separately

J251 Dim Drawing Image

Catalog Number For Use w/ Insulator Catalog No. Width (Inches) Weight/100 (lbs)
J251 J151 3-3/4 156

1)  Insulators shown for illustration only and must be ordered separately

J252 Dim Drawing Image

The J252 and J255 Secondary Pulley Brackets are designed for use both as stringing pulleys and as Secondary Clevises, making them especially useful for stringing and sagging conductors.
The conductor is strung and sagged with the bracket in the pulley position where it cannot bind. The 908 slot i the base makes it possible to rotate the bracket into the clevis position before or after the conductor is tied to the spool.
The J252 light-type has a metal table which contains the insulator bolt. The cotter bolt of the J255 heavy-duty type threads in to the bottom of the clevis, locking the special twist-lock head into a groove in the clevis top. Both features eliminate the cotter pin.
Material: Hot Dip Galvanized  

Catalog Number For Use w/ Insulator Catalog No. Width (Inches) Weight/100 (lbs)
J252 J101 or J151 2-5/8 150
J255 J0101, J101 or J151 3 256

1)  Insulators shown for illustration only and must be ordered separately

J250 Dim Drawing Image

The cotter bolt is held in position by means of the same type of tab that is used on the J252.

Catalog Number For Use w/ Insulator Catalog No. Weight/100 (lbs) A
J1398 J101 or J151 240 3-1/2
J1399 J101 or J151 254 4
J250 J101 or J151 152

1)  Insulators shown for illustration only and must be ordered separately

J93 Dim Drawing Image

The J93 Clivis is formed from stiff, hot-rolled channel, making it much heavier and stronger than similar brackets made of pressed steel channel. The J93 Clevis features raised projections near the bolt mounting slit which in capturing the bolt head to resist turning. The J093 Clevis has an 11/16 inch square hole for mounting with either a 5/8 inch carriage bolt or machine bolt.
Material: Hot Dip Galvanized

Catalog Number For Use w/ Insulator Catalog No. Weight/100 (lbs)
J093 J101 or J151 140
J93 J101 or J151 168

1)  Insulators shown for illustration only and must be ordered separately

J0313 Dim Drawing Image

Catalog Number Weight/100 (lbs)
J0313 118
J0342 152

1) Insulators shown for illustration only and must be ordered separately.

Scroll to Top